| Customization: | Available |
|---|---|
| Type: | Ball Mill |
| Motor Type: | AC Motor |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Ball mill application:
Ball mill is the key equipment for recrushing the materials after they are primarily crushed. It is an efficient tool for grinding various materials into powder. There are two ways of grinding: the dry process and the wet process. It can be divided into tabular type and flowing type according to different forms of discharging material. Ball mill is widely used in metallurgy, mining, chemical, cement, construction, industrial and mining industries etc.
Ball Mill Structure:
The machine is composed of feeding part, discharging part, turning part and driving part (reducer, small driving gear, electric motor and electric control). The quill shaft adopts cast steel part and the liner is detachable. The turning gearwheel adopts casting hobbing process and the drum is equipped with wear-resistant liner, which has good wear-resistance. The machine is with stable and reliable working condition. Moreover, according to different materials and discharging methods, there are dry ball mills and wet ball mills for choice.
Ball mill features:
1. The machine is made up of feeding part, discharging part, gyre part, transmission part (reducer, small transmission gear, motor, and electrical controller) and so on.
2. The hollow axis adopts the cast steel and the lining can be replaced. The big rotary gear is forged from cast rolling gears.
3. The barrel body is inlaid with wearable plates.
4. The machine runs steadily and efficiently.Ball mill advantages:
1. High milling efficiency
2. Mechanically simple design
3. Competitive capital cost
4. Use of low cost
5. No steel contamination of product
6. Capacity to operate continuously at full load power draw
7. Low rotational impeller speed with shallow charge depth providing reduced abrasion of impeller and body liner coverings
Ball Mill Working Principle:
The ball mill is a horizontal rotating device transmitted by the outer gear. The materials are transferred to the grinding chamber through the quill shaft uniformly. There are ladder liner and ripple liner and different specifications of steel balls in the chamber. The centrifugal force caused by rotation of barrel brings the steel balls to a certain height and impact and grind the materials. The grinding materials are discharged through the discharging board thus the grinding process is finished.
Specification of Energy-saving grid(overflow) Ball Mill
| Model | Cylinder RPM(r/min) |
Ball load(t) |
Feeding size(mm) |
Discharge size(mm) |
Capacity(t/h) |
Power(kw) |
Weight(t) |
| MQG600*1800 | 45.8 | 0.56 | ≤10 | 0.074-0.8 | 0.15-0.6 | 7.5 | 2 |
| MQG900*1800 | 38 | 1.8 | ≤25 | 0.075-0.6 | 0.4-2.7 | 22 | 5.5 |
| MQG900*3500 | 37.4 | 3 | ≤25 | 0.074-0.34 | 0.8-3.9 | 30 | 8 |
| MQG1200*2400 | 36 | 4.8 | ≤20 | 0.075-0.6 | 1.5-5.2 | 37 | 9.8 |
| MQG1200*4500 | 36 | 5.2 | ≤25 | 0.074 | 1.5-5.6 | 45 | 13.7 |
| MQG1300*4000 | 32 | 5.8 | ≤25 | 0.075-0.6 | 2-7.5 | 45 | 14.8 |
| MQG1500*3500 | 28.8 | 8.3 | ≤25 | 0.074-0.4 | 3.4-14 | 75 | 17.6 |
| MQG1500*4500 | 28.8 | 10 | ≤25 | 0.074-0.4 | 3.5-15 | 95 | 22.5 |
| MQG1500*5700 | 28.8 | 12 | ≤25 | 0.074-0.4 | 3.5-16 | 110 | 26.7 |
| MQG1500*6400 | 28.8 | 13 | ≤25 | 0.074-0.4 | 4-18 | 130 | 29.2 |
| MQG1830*3600 | 24.5 | 16 | ≤25 | 0.074-0.4 | 5.8-25 | 130 | 31.4 |
| MQG1830*4500 | 24.5 | 17.5 | ≤25 | 0.074-0.4 | 6.6-28 | 155 | 32.6 |
| MQG1830*7000 | 24.5 | 20 | ≤25 | 0.074-0.4 | 7.5-31 | 245 | 39.6 |
| MQG2100*3600 | 23.8 | 21 | ≤25 | 0.074-0.6 | 6-29 | 210 | 43.2 |
| MQG2100*4500 | 23.8 | 26 | ≤25 | 0.074-0.6 | 7.2-32 | 245 | 48.8 |
| MQG2200*7500 | 22.8 | 28 | ≤25 | 0.074-0.6 | 9-40 | 380 | 68 |
| MQG2400*3600 | 21.7 | 31 | ≤25 | 0.074-0.6 | 9-42 | 280 | 56 |
| MQG2400*9000 | 21.7 | 45 | ≤25 | 0.074-0.6 | 10-50 | 630 | 92 |
| MQG2700*3600 | 21.4 | 39 | ≤25 | 0.074-0.6 | 13-145 | 400 | 86 |
| MQG2700*4500 | 21.4 | 50 | ≤25 | 0.074-0.6 | 15-160 | 475 | 91 |
| MQG3000*5400 | 19 | 58 | ≤25 | 0.074-0.6 | 20-180 | 630 | 113.5 |
| MQG3200*3600 | 18.6 | 52 | ≤25 | 0.074-0.6 | 20-192 | 630 | 119 |
| MQG3200*4500 | 18.6 | 65 | ≤25 | 0.074-0.6 | 30-210 | 800 | 127 |
| MQG3200*5400 | 18.6 | 72 | ≤25 | 0.074-0.6 | 35-260 | 1000 | 145 |
| MQG3600*4500 | 17.3 | 88 | ≤25 | 0.074-0.6 | 30-230 | 1120 | 159.7 |
| MQG3600*5000 | 17.3 | 96 | ≤25 | 0.074-0.6 | 35-260 | 1250 | 165 |
| MQG3600*6000 | 17.3 | 117 | ≤25 | 0.074-0.6 | 38-280 | 1400 | 182 |
| MQG4000*6000 | 16.9 | 145 | ≤25 | 0.074-0.6 | 60-460 | 1500 | 216 |
| MQG4500*6000 | 15.6 | 180 | ≤25 | 0.074-0.6 | 80-550 | 2300 | 269.6 |
Zhengzhou Unique Industrial Equipment Co., Ltd, a reliable ad professional supplier of Ball Grinding Mill Since founded more than 10 years ago, our company has accumulated much experience in the business of Ball Grinding Mill and ceramic ball mill.Welcome to visit our factory and would like to start the cooperation with you in the near future.
Q1: How long is th warrenty of your equipments? Does your company supply the spare parts?
A: The warranty period of crusher equipments is one year. Yes, we supply the spare parts for you at lowest cost and we have a professional after-sale service team to promptly and thoroughly solve your problems.
Q2. What Information should customers give us, So that we can be able to provide you suitable quotation and service.
What minerals are you separating?
What's the maximum size of your raw minerals?
How much capacity do you need per hour for your project?
Q3.Can you test our samples?Do you provide beneficiation flow chart?
Yes. You can send your samples to us for test and analysis. Our experienced engineers are specialized in designing process flow for various ores beneficiation, including iron ore, tin ore, copper ore, gold ore, lead zinc ore, manganese ore, etc.
Q4.If I need the complete crushing plant can you help us to build it?
A: Yes, we can help you combine a complete crushing line and give you related professional advices as long as you need. We had already build many mining projects in China & Overseas.
Our Advantages---
A.We have over 30 years experiences of manufacturing crushers, crusher line and other mining equipments.
B.Our new wearable material ensures the working life of plate hammer, impact plate and liner board much longer.
C.Our even plate structure makes final material smaller and cubic, no inner crack.
Any questions , please contact us freely.
){kind=link}